Home > Dual Channel > Dual Channel Problems

Dual Channel Problems


When I test CPU for maximum heat (In place FFT), it runs flawless. Congratulations, you've noticed that this year's signature is based on outdated internet memes; CLICK HERE NOW to experience this unforgettable phenomenon. Must have happened to me five or six times over the last 20-30 builds or so.Yikes 5/20 = 25% kinda scary, even at 5/30 = 16.67% still scary. But the thing is probably i have found a ram stick as guilty; in single stick mode the system is resulting in bsods when i ran p95 in ram testing torture http://pseudoblog.net/dual-channel/dual-channel-fsb-calculating-the-bottlenecks-is-dual-channel-worth-it.html

I believe you have other things, possibly, going on. Reread your initial post and saw that you'd already checked that. The ram timing i remember is 6-6-6-18. with RAM in A1 and B1?Since the new, and so far assumed fully funtional RAM has exhibited the same behavior; I feel I can rule out the RAm as the culprit, http://www.tomshardware.com/answers/id-1827503/ram-dual-channel-problem.html

Dual Channel Ram Not Booting

Top Chrispy_ Silver subscriber Grand Gerbil Poohbah Posts: 3749 Joined: Fri Apr 09, 2004 3:49 pm Location: Europe, most frequently London. The machine could run fine in single channel but would either black screen, come up with AMD VPU recover, bluescreen or reset all together. 95Viper says thanks. Have you tried resetting the bios... I've also been playing skyrim and planetary annihilation for hours, and seen no deviation from expected performance.I was wondering if anyone has some recommendations for good, failure-inducing benchmarks or tests I

  • I'd also suggest minimal boot (onboard graphics, 1 ram stick in the first slot, install a PC speaker if you have one lying around)Modern boards often have a "three tries and
  • In short: increase the volt should hes LAST result, not first.
  • i think i lost the cash memo of the ram stickClick to expand...
  • I had something similar happen with my old Core 2 rig although the chipset was a 680i.

My Asus board has a BIOS switch. #4 corkyg, Mar 19, 2011 denis280 Diamond Member Joined: Jan 16, 2011 Messages: 3,393 Likes Received: 4 this is how it works. I've also tried loosening the timings on both sets of ram, under locking, and undervolting. Top rchaneberg Gerbil Topic Author Posts: 30 Joined: Thu May 03, 2007 4:24 pm Re: New Build, Dual channel memory problems Quote #12 Wed Jul 30, 2014 5:33 pm Ok. Dual Channel Not Working Asus eflat123 Member Joined: Jan 12, 2011 Messages: 55 Likes Received: 0 I have a Gigabyte 880GMA-UD2H rev 2.0 motherboard and I can't run a stick of memory in ram slot 2

If there's a problem with the DIMMs it's possible it's only coming out in dual channel operation.Testing with other RAM would be good, too, as it would isolate whether it's the Dual Channel Memory Not Working This sentence is just filler and as irrelevant as my signature. Must have happened to me five or six times over the last 20-30 builds or so.Yikes 5/20 = 25% kinda scary, even at 5/30 = 16.67% still scary.None of them have http://www.tomshardware.com/forum/294755-30-dual-channel-working No, create an account now.

If that seems to be it, RMA the ram. Ram Not Running In Dual Channel Im KhaosGamer, i from Québec,Canada and i would like to do a review on the IN WIN 509 E-ATX ROG Version! Ran memtest with a1 & a2 occupied, memory passed, no faults. AnandTech Forums: Technology, Hardware, Software, and Deals Home Forums > Hardware and Technology > Computer Help > Toggle Width Style Anandtech default style Home Contact Us Help Terms and Rules Privacy

Dual Channel Memory Not Working

I'm having a 6 year old very low end PC with following specs: AMD Sempron 145 2.8 GHz 2*2 GB DDR2 RAM(Dual Channel) Nvidia Geforce 7025(integrated graphics) Asus M2N68AM plus motherboard http://www.sevenforums.com/hardware-devices/230369-strange-memory-problem-dual-channel.html I had something similar happen with my old Core 2 rig although the chipset was a 680i. Dual Channel Ram Not Booting Stay logged in Search titles only Posted by Member: Separate names with a comma. How To Activate Dual Channel Ram I am curious as to why the video card died so suddenly.

ie, the 4790 worked in another board, and the board worked with another 4770, despite having the same BIOS versions on both. check my blog It has to do with the relationship to the cpu cores I think. #6 stargazr, Mar 19, 2011 Last edited: Mar 19, 2011 eflat123 Member Joined: Jan 12, 2011 Messages: The problem can be solves by: Reversing the sticks in the slots. Now with the non-faulty ram and the old card system is again stable. Enable Dual Channel Memory Gigabyte

An error (403 Forbidden) has occurred in response to this request. Hi, Thanks to u guys for replies. If they determine there's a physically damaged socket, IIRC the going rate to replace it for you is ~$90 for most manufacturers.Good luck! http://pseudoblog.net/dual-channel/dual-channel-triple-channel-question.html Yes, motherboards are supposed to come with all settings defaulted, but I've seen exceptions to this.Also try updating to the latest BIOS (with the RAM in A1/A2, of course).

Reply Reply post #4 of 4 4/11/16 at 9:20am Thread Starter Joyal Joined: Oct 2015 Location: India Posts: 5 Rep: 0 (Unique: 0) Select All Posts Dual Channel Not Working Gigabyte Life doesn't change after marriage, it changes after children! Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More...

Jun 25, 2012 at 5:41 PM #20 CaptainFailcon New Member Joined: Apr 27, 2012 Messages: 194 (0.11/day) Thanks Received: 41 Widjaja said: ↑ In response to the original subject of the

Yet the OP states the bsods were occurring before the new GPU was installed. 95Viper says thanks. Please help me in identifying the actual root cause of all the issues. My ram timing is 6-6-6-18, and the Command rate (1T/2T) is kept auto. Computer Won't Boot In Dual Channel Aonther thing - can i rely on memtest result for memory testing, because i tested the both rams even in dual channel mode with windows default memory diagnostic (MdSched.exe) in dos

The broken stick works fine on its own since the strain put on the memory bus is lower with only one stick, but with more RAM installed the workload increases and Computer Help Feb 22, 2003 problems with bp6 mobo with dual celerons and bus locking at 66mhz Computer Help Jan 1, 2002 corkyg Elite Member
Super Moderator
Peripherals Super Moderator Joined: Mar Then I removed one ram stick and tested both stick in standalone mode, and in standalone mode both are running fine without any error.With single ram the windows experience index is have a peek at these guys Computer Help Sep 8, 2014 DFI Mobo - dual mode RAM problem Computer Help Dec 2, 2005 Leadtek K7NCR18D pro Mobo and Dual Channel Problems Computer Help Apr 6, 2004 HELP!

May just be ram incompatibility. possible but not likey that almost never happens Jun 25, 2012 at 5:49 PM #21 Widjaja Joined: Jun 12, 2007 Messages: 4,819 (1.37/day) Thanks Received: 640 Location: Wangas, New Zealand Jun 20, 2012 at 7:25 AM #8 johnspack Joined: Oct 6, 2007 Messages: 4,936 (1.45/day) Thanks Received: 1,083 Location: Nelson B.C. edit: added snippet from manual So, if the manual is right(!), Channel 0 => 1 & 3 and Channel 1 => 2 & 4.

But, the table to the right suggest that for 2 modules, I use either 1 & 2 or 3 & 4. #1 eflat123, Mar 19, 2011 Last edited: Mar 19, by Stronghold › HighPoint RocketRAID 2720SGL 8-Port PCI-Express 2.0 x8 SAS/SATA...

© Copyright 2017 pseudoblog.net. All rights reserved.